Basal Reinforcement

Basal reinforcement is a technique used to improve the stability of embankments by placing a geotextile at the base of the embankment. The geotextile acts as a reinforcement layer, which helps to distribute the load of the embankment more evenly and prevent the soil from shearing.

Breakwaters Protection

Breakwaters are structures built offshore to protect part of the shoreline from erosion. They act as a barrier to waves, preventing them from reaching the shore and causing erosion. Breakwaters can be either fixed or floating, and they can be made of a variety of materials, including rock, concrete, and steel.

Dewatering Bag Technology

Dewatering bags are a type of geotextile fabric that is used to dewater a variety of materials, including sludge, sediment, and debris. The bags are typically made of a non-woven fabric that is porous enough to allow water to pass through, but not so porous that the material being dewatered will pass through as well.

Drainage & Filtration

Drainage and filtration are two important aspects of civil engineering. Drainage is the removal of water from an area, while filtration is the removal of solids from a liquid. Both of these processes are essential for the safe and efficient operation of many structures, including buildings, roads, and bridges.

Dykes Protection

A protection dyke is a structure that is built to protect land from flooding. It is typically an embankment or levee that is constructed along a river or coastline. Protection dykes can be made of a variety of materials, including earth, rock, concrete, and steel. They are often reinforced with vegetation or other materials to help prevent erosion.

Erosion Control

Erosion control is an important part of protecting our environment and our infrastructure. By using erosion control techniques, we can help to prevent erosion and its negative impacts.

Groynes Marine Protection

Groynes are structures that are built perpendicular to the shoreline to trap sand and prevent it from being washed away by waves and currents. They are a common method of beach erosion protection, and can be effective in slowing or stopping the erosion of a beach.

Liner Protection

Liner protection is the use of a geotextile to protect an impermeable geomembrane liner from damage and puncture during installation and while in operation.

Lining Solution

The lining is the use of Geosynthetic clay liners (GCLs), GCLs are a type of geosynthetic material that is used to create a barrier to fluids. They are made of a layer of bentonite clay sandwiched between two layers of geotextile.

Pavement Structures Rehabilitation

Pavement rehabilitation is the process of restoring or improving the condition of an existing pavement. This can be done in a variety of ways, including resurfacing, overlaying, and patching. Pavement geotextiles are a type of geosynthetic material that can be used to improve the performance of pavement rehabilitation projects.

Pond Capping

Pond capping is a process of covering a pond with a layer of material to prevent the release of contaminants into the environment. Pond capping is a complex process that should be done by a qualified professional. There are a number of factors that need to be considered, such as the type of pond, the type of waste, and the environmental regulations.

Reinforced Walls and Slopes

​Reinforced walls and slopes are a safe and effective way to improve the stability of soil. They are a good choice for a variety of applications, and they offer a number of advantages over traditional methods of soil stabilization.

Revetments Protection

Revetments are structures that are used to protect shorelines from erosion. They can be made of a variety of materials, including concrete, stone, and wood. Revetments work by absorbing the energy of waves and currents, which helps to prevent them from eroding the shoreline.

Scour Protection

Scour Protection with Geosynthetics is an effective method for protecting your shorelines and embankments from rapid erosion. Our products are designed to provide superior strength and durability, making them an ideal choice for any project requiring reliable scour protection. With our expert installation and extensive product range, we guarantee that your scour protection needs are met.

Subgrade Stabilization

Subgrade Stabilization using geosynthetics is an efficient and cost-effective way to improve the stability of roads and other infrastructure projects. It can be used to strengthen weak soils and provide an improved bearing capacity, as well as reduce the amount of fill material required. Geosynthetics provide a long-term solution to subgrade stabilization, making them a great choice for any project.

Veneer Reinforcement

Veneer Reinforcement is a heavy-duty geosynthetic material designed to increase the strength and durability of veneer walls. It is constructed from high-tensile strength polyester yarns and coated with a UV-resistant resin for extra protection from the elements. This product is easy to install, highly versatile, and offers superior strength and stability to veneer walls.